EbikeKitWorks / Conversion systems
Category guide · Product listings in preparationUnderstand the package before choosing the power. A useful kit listing should explain what is included, what fits, what is sold separately, and which documents support the installation.
Choose the architecture first
The right starting point depends on the bicycle, intended use, system design, installation requirements, and local rules.
A motor wheel and coordinated controls designed for a compatible front-fork installation.
Check fork material and suitability, axle and dropout dimensions, wheel size, brake clearance, and mounting instructions.
A rear motor wheel with the electrical parts required by the selected package.
Check rear spacing, axle fit, cassette or freewheel type, brake clearance, wheel size, and torque-arm requirements.
A motor mounted around the bottom bracket that works through the bicycle drivetrain.
Check bottom-bracket dimensions, frame clearance, chainline, gearing, brake performance, and installation tools.
Matched controller-and-display packages for a documented, compatible motor system.
Check voltage, current limits, motor type, display protocol, connector pinout, firmware, and cable lengths.
Inside the system
Package contents vary. Compare an itemized packing list with the components your bicycle and intended system require.
Provides electric drive; wheel, axle, brake, and gearing interfaces must match the bicycle.
Regulates electrical power and must match the motor, battery, display, sensors, and controls.
Shows supported ride information and provides settings for a compatible controller.
Detects pedaling and must fit the crank area and communicate with the selected system.
Signal the controller during braking and must suit the bicycle's brake configuration.
Harnesses, torque arms, spacers, fasteners, and mounts must follow the kit instructions.
Read the inclusions carefully
They may be sold separately. Battery, charger, controller, motor, connectors, and operating limits must be matched as one documented system.
Confirm whether a tire, tube, rim tape, spokes, and a fully assembled wheel are included for the selected option.
Confirm sprockets, brake rotor, adapters, spacers, and any model-specific mounting hardware.
Plan for the instructions, specialist tools, fitting, cable routing, setup, inspection, and ongoing service the system requires.
Review the individual electrical and installation categories next.
Explore E-Bike Components →